Description: This operation creates a new BBCS or BBCS-F trouble ticket.
| Input message | Output message |
|---|---|
| createTroubleTicketRequest | createTroubleTicketResponse |
Description: This operation modifies a pending BBCS trouble ticket.
| Input message | Output message |
|---|---|
| modifyPendingTroubleTicketRequest | modifyPendingTroubleTicketResponse |
Description: Adds a work log entry to an existing BBCS-F ticket.
| Input message | Output message |
|---|---|
| addWorkLogRequest | addWorkLogResponse |
Description: This operation cancel a pending BBCS trouble ticket.
| Input message | Output message |
|---|---|
| cancelPendingTroubleTicketRequest | cancelPendingTroubleTicketResponse |
Description: This operation returns the details of an existing BBCS trouble ticket.
| Input message | Output message |
|---|---|
| getDetailTroubleTicketRequest | getDetailTroubleTicketResponse |
Description: This operation returns the line state information of an xDSL access.
| Input message | Output message |
|---|---|
| getXdslInfoRequest | getXdslInfoResponse |
Description: This operation returns the planned outages for a certain dn/nsn.
| Input message | Output message |
|---|---|
| getDnNsnPlannedOutageRequest | getDnNsnPlannedOutageResponse |
Description: This operation returns the planned outages for the dn/nsn of a certain ISP.
| Input message | Output message |
|---|---|
| getIspPlannedOutageRequest | getIspPlannedOutageResponse |
| Input message | Output message |
|---|---|
| getIspPlannedOutageReportRequest | getIspPlannedOutageReportResponse |
| Input message | Output message |
|---|---|
| getNetworkCustomerNotificationReportRequest | getNetworkCustomerNotificationReportResponse |
| Input message | Output message |
|---|---|
| getValidAccessProfilesRequest | getValidAccessProfilesResponse |
| Input message | Output message |
|---|---|
| modifyAccessProfileRequest | modifyAccessProfileResponse |
| Input message | Output message |
|---|---|
| getAttachmentDetailRequest | getAttachmentDetailResponse |
| Input message | Output message |
|---|---|
| getConnectivityCheckRequest | getConnectivityCheckResponse |
| Element | Type | Occ | Comment | parameters | createTroubleTicketResponse | 1..1 |
|---|
| Element | Type | Occ | Comment | parameters | modifyPendingTroubleTicket | 1..1 |
|---|
| Element | Type | Occ | Comment | parameters | modifyPendingTroubleTicketResponse | 1..1 |
|---|
| Element | Type | Occ | Comment | parameters | cancelPendingTroubleTicket | 1..1 |
|---|
| Element | Type | Occ | Comment | parameters | cancelPendingTroubleTicketResponse | 1..1 |
|---|
| Element | Type | Occ | Comment | parameters | getDetailTroubleTicketResponse | 1..1 |
|---|
| Element | Type | Occ | Comment | parameters | getDnNsnPlannedOutageResponse | 1..1 |
|---|
| Element | Type | Occ | Comment | parameters | getIspPlannedOutageResponse | 1..1 |
|---|
| Element | Type | Occ | Comment | parameters | getIspPlannedOutageReport | 1..1 |
|---|
| Element | Type | Occ | Comment | parameters | getIspPlannedOutageReportResponse | 1..1 |
|---|
| Element | Type | Occ | Comment | parameters | getNetworkCustomerNotificationReport | 1..1 |
|---|
| Element | Type | Occ | Comment | parameters | getNetworkCustomerNotificationReportResponse | 1..1 |
|---|
| Element | Type | Occ | Comment | parameters | getValidAccessProfilesRequest | 1..1 |
|---|
| Element | Type | Occ | Comment | parameters | getValidAccessProfilesResponse | 1..1 |
|---|
| Element | Type | Occ | Comment | parameters | modifyAccessProfileResponse | 1..1 |
|---|
| Element | Type | Occ | Comment | parameters | getAttachmentDetailResponse | 1..1 |
|---|
| Element | Type | Occ | Comment | parameters | getConnectivityCheckRequest | 1..1 |
|---|
| Element | Type | Occ | Comment | parameters | getConnectivityCheckResponse | 1..1 |
|---|
| Element | Type | Occ | Comment |
|---|---|---|---|
| request | createTroubleTicketRequestType | 1..1 | Purpose: creates a new BBCS trouble ticket. The address of the enduser (is mandatory for SDSL where at least 'zip' and 'city' have to be provided) |
| Element | Type | Occ | Comment |
|---|---|---|---|
| response | createTroubleTicketAckType | 1..1 | Acknowledge response for the CREATE_TROUBLE_TICKET command. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| request | modifyPendingTroubleTicketRequestType | 1..1 | Purpose: modifies an existing BBCS trouble ticket. The address of the enduser |
| Element | Type | Occ | Comment |
|---|---|---|---|
| response | modifyPendingTroubleTicketAckType | 1..1 | Acknowledge response for the MODIFY_PENDING_TROUBLE_TICKET command. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| request | addWorkLogRequestType | 1..1 | Purpose: adds a work log entry to an existing BBCS-F trouble ticket. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| response | addWorkLogAckType | 1..1 | Acknowledge response for the ADD_WORK_LOG command. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| request | cancelPendingTroubleTicketRequestType | 1..1 | Purpose: cancels an existing BBCS trouble ticket. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| response | cancelPendingTroubleTicketAckType | 1..1 | Acknowledge response for the CANCEL_PENDING_TROUBLE_TICKET command. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| request | getDetailTroubleTicketRequestType | 1..1 | Purpose: returns the details of an existing BBCS trouble ticket. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| response | getDetailTroubleTicketAckType | 1..1 | Acknowledge response for the GETDETAIL_TROUBLE_TICKET command. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| request | getXdslInfoRequestType | 1..1 | Purpose: returns the line state information of an xDSL access. mobile phone number eMail address for asynchronous responses with LQD results if choosen the measurement picture will be delivered as eMail attachment |
| Element | Type | Occ | Comment |
|---|---|---|---|
| response | getXdslInfoResponseType | 1..1 | LIST-response for the GET_XDSL_INFO command. Returns the line state information of an xDSL access. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| request | getDnNsnPlannedOutageRequestType | 1..1 | Purpose: returns the planned outages for a certain DN/NSN. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| response | getDnNsnPlannedOutageAckType | 1..1 | Acknowledge response for the GET_DN_NSN_PLANNED_OUTAGE command. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| request | getIspPlannedOutageRequestType | 1..1 | Purpose: returns the planned outages for all customers of a certain ISP. Stammnrtyp for planned work request, if empty no UMSA elements will be returned. Stammnrtyp for planned work request, if empty no PW elements will be returned. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| response | getIspPlannedOutageAckType | 1..1 | Acknowledge response for the GET_ISP_PLANNED_OUTAGE command. The information request ID. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| request | getIspPlannedOutageReportRequestType | 1..1 | Purpose: returns the planned outages report of a certain ISP wich was previously requested by getIspPlannedOutage. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| response | getIspPlannedOutageResponseType | 1..1 | response for the GET_ISP_PLANNED_OUTAGE_REPORT command. Returns the list of planned outages prior requested by getIspPlannedOutage. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| request | getNetworkCustomerNotificationReportRequestType | 1..1 | Purpose: returns the network customer notification report of a certain ISP. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| response | getNetworkCustomerNotificationReportResponseType | 1..1 | response for the GET_NETWORK_CUSTOMER_NOTIFICATION_REPORT command. Returns the list of network customer notifications. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| request | getValidAccessProfilesRequestType | 1..1 | Purpose: returns the valid access profiles. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| response | getValidAccessProfileResponseType | 1..1 | response for the GET_VALID_ACCESS_PROFILES_RESPONSE command. Returns the list of valid Access Profiles. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| request | modifyAccessProfileRequestType | 1..1 | Purpose: modify the access profile. set open-pipe status to manual |
| Element | Type | Occ | Comment |
|---|---|---|---|
| response | modifyAccessProfileResponseType | 1..1 | response for the GET_MODIFY_ACCESS_PROFILES_RESPONSE command. . |
| Element | Type | Occ | Comment |
|---|---|---|---|
| request | getAttachmentDetailRequestType | 1..1 | Purpose: get the Detail about a Attachment |
| Element | Type | Occ | Comment |
|---|---|---|---|
| response | getAttachmentDetailAckType | 1..1 | Acknowledge response for the getAttachmentDetail command. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| request | getConnectivityCheckRequestType | 1..1 | Request for Connectivity information |
| Element | Type | Occ | Comment |
|---|---|---|---|
| response | getConnectivityCheckResponseType | 1..1 | Connectivity Check |
| Element | Type | Occ | Comment |
|---|---|---|---|
| request | createTroubleTicketRequestType | 1..1 | Purpose: creates a new BBCS trouble ticket. The address of the enduser (is mandatory for SDSL where at least 'zip' and 'city' have to be provided) |
| Element | Type | Occ | Comment |
|---|---|---|---|
| response | createTroubleTicketAckType | 1..1 | Acknowledge response for the CREATE_TROUBLE_TICKET command. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| request | modifyPendingTroubleTicketRequestType | 1..1 | Purpose: modifies an existing BBCS trouble ticket. The address of the enduser |
| Element | Type | Occ | Comment |
|---|---|---|---|
| response | modifyPendingTroubleTicketAckType | 1..1 | Acknowledge response for the MODIFY_PENDING_TROUBLE_TICKET command. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| request | addWorkLogRequestType | 1..1 | Purpose: adds a work log entry to an existing BBCS-F trouble ticket. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| response | addWorkLogAckType | 1..1 | Acknowledge response for the ADD_WORK_LOG command. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| request | cancelPendingTroubleTicketRequestType | 1..1 | Purpose: cancels an existing BBCS trouble ticket. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| response | cancelPendingTroubleTicketAckType | 1..1 | Acknowledge response for the CANCEL_PENDING_TROUBLE_TICKET command. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| request | getDetailTroubleTicketRequestType | 1..1 | Purpose: returns the details of an existing BBCS trouble ticket. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| response | getDetailTroubleTicketAckType | 1..1 | Acknowledge response for the GETDETAIL_TROUBLE_TICKET command. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| request | getXdslInfoRequestType | 1..1 | Purpose: returns the line state information of an xDSL access. mobile phone number eMail address for asynchronous responses with LQD results if choosen the measurement picture will be delivered as eMail attachment |
| Element | Type | Occ | Comment |
|---|---|---|---|
| response | getXdslInfoResponseType | 1..1 | LIST-response for the GET_XDSL_INFO command. Returns the line state information of an xDSL access. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| request | getDnNsnPlannedOutageRequestType | 1..1 | Purpose: returns the planned outages for a certain DN/NSN. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| response | getDnNsnPlannedOutageAckType | 1..1 | Acknowledge response for the GET_DN_NSN_PLANNED_OUTAGE command. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| request | getIspPlannedOutageRequestType | 1..1 | Purpose: returns the planned outages for all customers of a certain ISP. Stammnrtyp for planned work request, if empty no UMSA elements will be returned. Stammnrtyp for planned work request, if empty no PW elements will be returned. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| response | getIspPlannedOutageAckType | 1..1 | Acknowledge response for the GET_ISP_PLANNED_OUTAGE command. The information request ID. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| request | getIspPlannedOutageReportRequestType | 1..1 | Purpose: returns the planned outages report of a certain ISP wich was previously requested by getIspPlannedOutage. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| response | getIspPlannedOutageResponseType | 1..1 | response for the GET_ISP_PLANNED_OUTAGE_REPORT command. Returns the list of planned outages prior requested by getIspPlannedOutage. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| request | getNetworkCustomerNotificationReportRequestType | 1..1 | Purpose: returns the network customer notification report of a certain ISP. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| response | getNetworkCustomerNotificationReportResponseType | 1..1 | response for the GET_NETWORK_CUSTOMER_NOTIFICATION_REPORT command. Returns the list of network customer notifications. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| request | getValidAccessProfilesRequestType | 1..1 | Purpose: returns the valid access profiles. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| response | getValidAccessProfileResponseType | 1..1 | response for the GET_VALID_ACCESS_PROFILES_RESPONSE command. Returns the list of valid Access Profiles. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| request | modifyAccessProfileRequestType | 1..1 | Purpose: modify the access profile. set open-pipe status to manual |
| Element | Type | Occ | Comment |
|---|---|---|---|
| response | modifyAccessProfileResponseType | 1..1 | response for the GET_MODIFY_ACCESS_PROFILES_RESPONSE command. . |
| Element | Type | Occ | Comment |
|---|---|---|---|
| request | getAttachmentDetailRequestType | 1..1 | Purpose: get the Detail about a Attachment |
| Element | Type | Occ | Comment |
|---|---|---|---|
| response | getAttachmentDetailAckType | 1..1 | Acknowledge response for the getAttachmentDetail command. |
| Element | Type | Occ | Comment |
|---|---|---|---|
| request | getConnectivityCheckRequestType | 1..1 | Request for Connectivity information |
| Element | Type | Occ | Comment |
|---|---|---|---|
| response | getConnectivityCheckResponseType | 1..1 | Connectivity Check |
Description: Purpose: creates a new BBCS trouble ticket.
Used by: createTroubleTicket
Extension of: requestType
| Element | Type | Occ | Comment | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ispId | xs:int (totalDigits:6) | 1..1 | The ISP id | ||||||||||||||||
| ispTtRef | xs:string (minLength:1, maxLength:30) | 1..1 | An external reference (an ID assigned by the ISP) identifying the TT. | ||||||||||||||||
| ispPhoneNr | xs:string (pattern:(\+)?([0-9]){7,15}) | 0..1 | The phone number of the ISP (business hours) | ||||||||||||||||
| endUser | endUser | 0..1 |
|
||||||||||||||||
| contactInfo | contactInfoType | 0..1 | Contact Person (Must not be the same as the end user. It can be for insdtance a Facility Manager or a Care Taker) | ||||||||||||||||
| dnType | xs:int (totalDigits:3) | 1..1 | |||||||||||||||||
| bbType | xs:int (totalDigits:3) | 1..1 | [LOV-ID: 0276] The BB type. | ||||||||||||||||
| stnrDdi | xs:string (pattern:0[1-9]\d{8}) | 0..1 | The "Stammnummer" (DDI) . | ||||||||||||||||
| cableBox | cableBoxType | 0..1 | The cable box data (aka. "Ueberfuehrungspunkt", "UP"). | ||||||||||||||||
| problemDescription | xs:string (maxLength:2048) | 1..1 | Description of the problem | ||||||||||||||||
| problemDateTime | xs:dateTime | 1..1 | The date and time of the problem. | ||||||||||||||||
| lastLoginDateTime | xs:dateTime | 0..1 | The date and time of the last login. | ||||||||||||||||
| comment | xs:string (minLength:1, maxLength:256) | 0..1 | A comment (free text) | ||||||||||||||||
| appointmentId | xs:string (maxLength:32) | 0..1 | Appointment ID referencing an existing agreement. | ||||||||||||||||
| serviceProblem | serviceProblemType | 1..1 | A service problem item. | ||||||||||||||||
| ispApplicationId | xs:string (maxLength:40) | 0..1 | Used for the ISP's routing. | ||||||||||||||||
| ispApplicationEntityId | xs:string (maxLength:40) | 0..1 | Used for the ISP's routing. | ||||||||||||||||
| measuredIspValues | xs:string (maxLength:65536) | 0..1 | The measuerd values from ISP | ||||||||||||||||
| saSlaRequested | xs:int (totalDigits:3) | 0..1 | For future use. | ||||||||||||||||
| workLog | workLogRequestType | 0..1 | A work log entry | ||||||||||||||||
| neverWorked | xs:boolean | 0..1 | Indicates if the connection vever worked before | ||||||||||||||||
| bindingId | xs:string (maxLength:15) | 0..1 | BindingId or AccessId | ||||||||||||||||
| - choice: |
|
1..1 |
Description: Purpose: modifies an existing BBCS trouble ticket.
Used by: modifyPendingTroubleTicket
Extension of: requestType
| Element | Type | Occ | Comment |
|---|---|---|---|
| ispId | xs:int (totalDigits:6) | 1..1 | The ISP id |
| ttIdWsg | xs:decimal (totalDigits:10) | 1..1 | Ticket id assigned by WSG |
| ispTtRef | xs:string (minLength:1, maxLength:30) | 0..1 | An external reference (an ID assigned by the ISP) identifying the TT. |
| ispPhoneNr | xs:string (pattern:(\+)?([0-9]){7,15}) | 0..1 | The phone number of the ISP (business hours) |
| endUser | endUser | 0..1 |
|
| contactInfo | contactInfoType | 0..1 | Contact Person (Must not be the same as the end user. It can be for insdtance a Facility Manager or a Care Taker) |
| dnVnNsn | xs:string (pattern:0[1-9]\d{8}) | 0..1 | The DN, VN or NSN. |
| dnType | xs:int (totalDigits:3) | 0..1 | |
| bbType | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 0276] The BB type. |
| stnrDdi | xs:string (pattern:0[1-9]\d{8}) | 0..1 | The "Stammnummer" (DDI) . |
| cableBox | cableBoxType | 0..1 | The cable box data (aka. "Ueberfuehrungspunkt", "UP"). |
| problemDescription | xs:string (maxLength:2048) | 0..1 | Description of the problem |
| problemDateTime | xs:dateTime | 0..1 | The date and time of the problem. |
| lastLoginDateTime | xs:dateTime | 0..1 | The date and time of the last login. |
| comment | xs:string (minLength:1, maxLength:256) | 0..1 | A comment (free text) |
| appointment | appointment | 0..1 | Appointment data. |
| addOnInformation | xs:string (maxLength:256) | 0..1 | Add-on information for the ticket (send as 'comment' to ticketing system and used for information exchange between all parties). |
| serviceProblem | serviceProblemType | 0..1 | A service problem item. |
| ispApplicationId | xs:string (maxLength:40) | 0..1 | Used for the ISP's routing. |
| ispApplicationEntityId | xs:string (maxLength:40) | 0..1 | Used for the ISP's routing. |
| measuredIspValues | xs:string (maxLength:65536) | 0..1 | The measuerd values from ISP |
| neverWorked | xs:boolean | 0..1 | Indicates if the connection vever worked before |
| bindingId | xs:string (maxLength:15) | 0..1 | BindingId or AccessId |
Description: Purpose: adds a work log entry to an existing BBCS-F trouble ticket.
Used by: addWorkLog
Extension of: requestType
| Element | Type | Occ | Comment |
|---|---|---|---|
| ispId | xs:int (totalDigits:6) | 1..1 | The ISP id |
| ttIdWsg | xs:decimal (totalDigits:10) | 1..1 | Ticket id assigned by WSG |
| workLog | workLogRequestType | 1..n | The binary content of the file, please limit the summary size of all the contens to 2Mb. Otherwise perform mutliple files and use addWorklog |
Description: Purpose: cancels an existing BBCS trouble ticket.
Used by: cancelPendingTroubleTicket
Extension of: requestType
| Element | Type | Occ | Comment |
|---|---|---|---|
| ispId | xs:int (totalDigits:6) | 1..1 | The ISP id |
| ttIdWsg | xs:decimal (totalDigits:10) | 1..1 | Ticket id assigned by WSG |
| comment | xs:string (minLength:1, maxLength:256) | 0..1 | A comment (free text) |
Description: Purpose: returns the details of an existing BBCS trouble ticket.
Used by: getDetailTroubleTicket
Extension of: requestType
| Element | Type | Occ | Comment |
|---|---|---|---|
| ispId | xs:int (totalDigits:6) | 1..1 | The ISP id |
| ttIdWsg | xs:decimal (totalDigits:10) | 1..1 | Ticket id assigned by WSG |
Description: Purpose: returns the planned outages for all customers of a certain ISP.
Used by: getIspPlannedOutage
Extension of: requestType
| Element | Type | Occ | Comment |
|---|---|---|---|
| ispId | xs:int (totalDigits:6) | 1..1 | The ISP id |
| startDateTime | xs:dateTime | 1..1 | |
| endDateTime | xs:dateTime | 0..1 | |
| dnTypeUMSA | xs:int (totalDigits:3) | 0..n | Stammnrtyp for planned work request, if empty no UMSA elements will be returned. |
| dnTypePW | xs:int (totalDigits:3) | 0..n | Stammnrtyp for planned work request, if empty no PW elements will be returned. |
Description: Purpose: returns the planned outages report of a certain ISP wich was previously requested by getIspPlannedOutage.
Used by: getIspPlannedOutageReport
Extension of: requestType
| Element | Type | Occ | Comment | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ispId | xs:int (totalDigits:6) | 1..1 | The ISP id | ||||||||||||
| - choice: |
|
1..1 |
Description: Purpose: returns the planned outages for a certain DN/NSN.
Used by: getDnNsnPlannedOutage
Extension of: requestType
| Element | Type | Occ | Comment |
|---|---|---|---|
| ispId | xs:int (totalDigits:6) | 1..1 | The ISP id |
| dnVnNsn | xs:string (pattern:0[1-9]\d{8}) | 1..1 | The DN, VN or NSN. |
Description: Purpose: returns the line state information of an xDSL access.
Used by: getXdslInfo
Extension of: requestType
| Element | Type | Occ | Comment | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| fetchMeasurementHistoryData | xs:boolean | 0..1 | A flag to indicate if measurement history data is to be fetched or not (default is false). | ||||||||||||
| fetchAlarmData | xs:boolean | 0..1 | A flag to indicate if alarm data is to be fetched or not (default is false). | ||||||||||||
| fetchMeltData | xs:boolean | 0..1 | A flag to indicate if melt data is to be fetched or not (default is false). | ||||||||||||
| runNewExamination | xs:boolean | 0..1 | A flag to indicate if a new examintation has to be run (default is true). | ||||||||||||
| startCommand | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 1314] LOV_START_COMMAND: 1 = start LQD 24hrs, 2 = start LQD 2min, 3 = start Fast Profile Change, 4 = start Fast Virtual Profile Change, 5 = start Resynchronize Line, 6 = start Reconfig Line This attribute can only be set from the ISP managing the requested access. | ||||||||||||
| mobileNumber | xs:string (pattern:(\+)?([0-9]){7,15}) | 0..1 | mobile phone number | ||||||||||||
| eMailAddress | xs:string (maxLength:100) | 0..1 | eMail address for asynchronous responses with LQD results | ||||||||||||
| pictureRequired | xs:boolean | 0..1 | if choosen the measurement picture will be delivered as eMail attachment | ||||||||||||
| - choice: |
|
1..1 |
Description: Purpose: returns the network customer notification report of a certain ISP.
Used by: getNetworkCustomerNotificationReport
Extension of: requestType
| Element | Type | Occ | Comment | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ispId | xs:int (totalDigits:6) | 1..1 | The ISP id | ||||||||||||
| - choice: |
|
1..1 |
Description: Purpose: returns the valid access profiles.
Used by: getValidAccessProfilesRequest
Extension of: requestType
| Element | Type | Occ | Comment |
|---|---|---|---|
| ispId | xs:int (totalDigits:6) | 1..1 | The ISP id |
| dnVnNsn | xs:string (pattern:0[1-9]\d{8}) | 1..1 | The DN, VN or NSN. |
Description: Purpose: modify the access profile.
Used by: modifyAccessProfileRequest
Extension of: requestType
| Element | Type | Occ | Comment |
|---|---|---|---|
| ispId | xs:int (totalDigits:6) | 1..1 | The ISP id |
| dnVnNsn | xs:string (pattern:0[1-9]\d{8}) | 1..1 | The DN, VN or NSN. |
| accessSpeedProfileNr | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 1134] Access Speed profile number |
| psdClass | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 1061] BB_PSD_CLASS, Power Spectral Density Class |
| interleaveMode | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 1008] The interleave mode. |
| bbType | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 0276] The BB type. |
| technologyType | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 9025] LOV_TECHNOLOGY_TYPE (1 = VDSL; 2 = VDSL vectoring; 3 = G.FAST) |
| comment | xs:string (minLength:1, maxLength:256) | 0..1 | A comment (free text) |
| setOpStatusToManual | xs:boolean | 0..1 | set open-pipe status to manual |
Description: Purpose: get the Detail about a Attachment
Used by: getAttachmentDetailRequest
Extension of: requestType
| Element | Type | Occ | Comment |
|---|---|---|---|
| ispId | xs:int (totalDigits:6) | 1..1 | The ISP id |
| fileId | xs:int | 1..1 | id of file |
Description: Request for Connectivity information
Used by: getConnectivityCheckRequest
Extension of: requestType
| Element | Type | Occ | Comment | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ispId | xs:int (totalDigits:6) | 1..1 | The ISP id | ||||||||||||
| - choice: |
|
1..1 |
Description: The abstract generic request message type.
Extended by: createTroubleTicketRequestType, modifyPendingTroubleTicketRequestType, addWorkLogRequestType, cancelPendingTroubleTicketRequestType, getDetailTroubleTicketRequestType, getIspPlannedOutageRequestType, getIspPlannedOutageReportRequestType, getDnNsnPlannedOutageRequestType, getXdslInfoRequestType, getNetworkCustomerNotificationReportRequestType, getValidAccessProfilesRequestType, modifyAccessProfileRequestType, getAttachmentDetailRequestType, getConnectivityCheckRequestType
Extension of: messageType
Description: Acknowledge response for the CREATE_TROUBLE_TICKET command.
Used by: createTroubleTicketResponse
Extension of: bbcsTroubleTicketAckType
Description: Acknowledge response for the MODIFY_PENDING_TROUBLE_TICKET command.
Used by: modifyPendingTroubleTicketResponse
Extension of: bbcsTroubleTicketAckType
Description: Acknowledge response for the ADD_WORK_LOG command.
Used by: addWorkLogResponse
Extension of: bbcsTroubleTicketAckType
Description: Acknowledge response for the CANCEL_PENDING_TROUBLE_TICKET command.
Used by: cancelPendingTroubleTicketResponse
Extension of: bbcsTroubleTicketAckType
Description: Acknowledge response for specific BBCS-TroubleTicket upload commands.
Extended by: createTroubleTicketAckType, modifyPendingTroubleTicketAckType, addWorkLogAckType, cancelPendingTroubleTicketAckType
Extension of: ackType
| Element | Type | Occ | Comment |
|---|---|---|---|
| ttIdWsg | xs:decimal (totalDigits:10) | 0..1 | Ticket id assigned by WSG |
| ttIdSys | xs:string (maxLength:30) | 0..1 | Ticket id assigned by TT system |
| ttState | xs:int (Enumeration: 1, 2, 3, 4, 5, 6, 7)
|
0..1 | The state of a trouble ticket. |
| dnType | xs:int (totalDigits:3) | 0..1 | |
| bbType | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 0276] The BB type. |
| contrEleId | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 0320] A contract element ID |
| saSla | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 0283] The service level assurance level of the trouble ticket. |
Description: Acknowledge response for the LIST_TROUBLE_TICKET command.
Extension of: ackType
Description: Acknowledge response for the GETDETAIL_TROUBLE_TICKET command.
Used by: getDetailTroubleTicketResponse
Extension of: ackType
| Element | Type | Occ | Comment |
|---|---|---|---|
| ticket | atType | 0..1 | An access trouble ticket and its details. Contact informations Indicates whether the problem processing is being suspended or not. Total material costs in CHF. (example: '12.25'; pattern: '10d.2d') Flat rate code in CHF. (E.g. 7 = xxx CHF) Number of flat rates per TT. (Generally 1) Expense ratio code. (E.g. 01=140 CHF, 02=120 CHF) Work expense in minutes. (Conversion into hours and multiply with STD_ID rate not done) A history entry of the ticket |
Description: Acknowledge response for the CREATE_CONNECTIVITY_TROUBLE_TICKET command.
Extension of: connectivityTroubleTicketAckType
Description: Acknowledge response for specific Connectivity-TroubleTicket- upload commands.
Extended by: createConnectivityTroubleTicketAckType
Extension of: ackType
| Element | Type | Occ | Comment |
|---|---|---|---|
| ttIdWsg | xs:decimal (totalDigits:10) | 0..1 | Ticket id assigned by WSG |
Description: Acknowledge response for the LIST_CONNECTIVITY_TROUBLE_TICKET command.
Extension of: ackType
Description: Acknowledge response for all upload Information-Service-commands.
Extension of: ackType
Description: Acknowledge response for the GET_DN_NSN_PLANNED_OUTAGE command.
Used by: getDnNsnPlannedOutageResponse
Extension of: ackType
| Element | Type | Occ | Comment |
|---|---|---|---|
| plannedOutage | PlannedOutage | 0..n |
Description: Acknowledge response for the GET_ISP_PLANNED_OUTAGE command.
Used by: getIspPlannedOutageResponse
Extension of: ackType
| Element | Type | Occ | Comment |
|---|---|---|---|
| irId | xs:string | 0..1 | The information request ID. |
| fileName | xs:string (maxLength:128) | 0..1 | name of file |
Description: Acknowledge response for the getAttachmentDetail command.
Used by: getAttachmentDetailResponse
Extension of: ackType
| Element | Type | Occ | Comment | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| attachment |
|
0..1 |
Description: Connectivity Check
Used by: getConnectivityCheckResponse
Extension of: ackType
| Element | Type | Occ | Comment |
|---|---|---|---|
| ipAddress | xs:string | 0..1 | An IP address. |
| incSTT | incSTT | 0..n | Service trouble ticket |
| incMT | incMT | 0..n | Maintenance ticket |
| vitality | vitality | 0..1 | vitality The vitality of a service indicates the present status of the service that is either available (vitality = 100) or unavailable (vitality = 0). -1 = never worked a number between 0-100 that reflects the confidence level of the value. Currently, this value is not calculated by SEO -> it is static = 65 |
Description: response for the GET_ISP_PLANNED_OUTAGE_REPORT command. Returns the list of planned outages prior requested by getIspPlannedOutage.
Used by: getIspPlannedOutageReportResponse
Extension of: ackType
| Element | Type | Occ | Comment |
|---|---|---|---|
| aihpw:PlannedOutageElements | PlannedOutageList | 0..1 |
Description: response for the GET_NETWORK_CUSTOMER_NOTIFICATION_REPORT command. Returns the list of network customer notifications.
Used by: getNetworkCustomerNotificationReportResponse
Extension of: ackType
| Element | Type | Occ | Comment |
|---|---|---|---|
| ncn:networkCustomerNotification | networkCustomerNotificationType | 0..1 | The network customer notification |
Description: response for the GET_VALID_ACCESS_PROFILES_RESPONSE command. Returns the list of valid Access Profiles.
Used by: getValidAccessProfilesResponse
Extension of: ackType
| Element | Type | Occ | Comment |
|---|---|---|---|
| validAccessProfile | validAccessProfileType | 0..n | Valid Access Profiles Item Item |
Description: response for the GET_MODIFY_ACCESS_PROFILES_RESPONSE command. .
Used by: modifyAccessProfileResponse
Extension of: ackType
| Element | Type | Occ | Comment |
|---|---|---|---|
| orderNr | xs:string (pattern:[1-9]\d{25}) | 0..1 | Order Nr. |
Description: The generic acknowledge response type.
Extended by: bbcsTroubleTicketAckType, listTroubleTicketAckType, getDetailTroubleTicketAckType, connectivityTroubleTicketAckType, listConnectivityTroubleTicketAckType, informationServiceAckType, getDnNsnPlannedOutageAckType, getIspPlannedOutageAckType, getAttachmentDetailAckType, getConnectivityCheckResponseType, getIspPlannedOutageResponseType, getNetworkCustomerNotificationReportResponseType, getValidAccessProfileResponseType, modifyAccessProfileResponseType
Extension of: responseType
Description: LIST-response for the GET_XDSL_INFO command. Returns the line state information of an xDSL access.
Used by: getXdslInfoResponse
Extension of: responseType
| Element | Type | Occ | Comment |
|---|---|---|---|
| xdslInfo | xdslInfoType | 0..n | The information on the xDSL access. The date/time of the request. The date/time of the response. The response message. The access profile details. The information-light (line state) of the xDSL access. The description of the underlying problem. The proposed 'repair' action. irIfWsg references the id for the reconfigureLine in case of asked for in the request |
Description: The generic response message type.
Extended by: ackType, getXdslInfoResponseType
Extension of: messageType
| Element | Type | Occ | Comment |
|---|---|---|---|
| success | xs:boolean | 1..1 | The result code for the transaction ("true" if request was successful, "false" otherwise). |
| reason | xs:string (pattern:[\dA-Z]{3}) | 0..1 | A 3-letter error code (aka messageId) where "000" means "ok". |
| reasonComment | xs:string (minLength:1, maxLength:256) | 0..1 | Some additional textual description for the reason. |
| operationLogId | xs:long | 0..1 | reference to this operation call. Can be used in clarification tickets |
Description: The abstract generic message type.
Extended by: requestType, responseType
| Attribute | Type | Use | Comment |
|---|---|---|---|
| correlationId | xs:string | optional | A unique ID to correlate a request . |
Description: An address containing as well first- and lastname.
Extension of: addressType
| Element | Type | Occ | Comment |
|---|---|---|---|
| firstName | xs:string (minLength:1, maxLength:30) | 0..1 | The First Name |
| lastName | xs:string (minLength:1, maxLength:30) | 0..1 | The subject's last name. |
Description: A (geographical) address entity.
Extended by: addressWithSubjectType, endUser
| Element | Type | Occ | Comment |
|---|---|---|---|
| street | xs:string (minLength:1, maxLength:30) | 0..1 | A street name. |
| houseNr | xs:string (minLength:1, maxLength:12) | 0..1 | A house number. |
| building | xs:string (minLength:1, maxLength:30) | 0..1 | A house- or building- description. |
| zip | xs:int (minInclusive:1000, maxInclusive:999999) | 0..1 | A zip code. |
| city | xs:string (minLength:1, maxLength:25) | 0..1 | A city name. |
Description: Information on the enduser (address, phone numbers, login, etc)
Used by: atType, createTroubleTicketRequestType, modifyPendingTroubleTicketRequestType
Extension of: addressType
| Element | Type | Occ | Comment |
|---|---|---|---|
| endUserName | xs:string (maxLength:60) | 0..1 | The name of the enduser (firstname,lastname). |
| endUserLogin | xs:string (maxLength:30) | 0..1 | The login name of the enduser. |
| endUserCompany | xs:string (maxLength:20) | 0..1 | The company name of the enduser. |
| endUserPhoneNr | xs:string (pattern:(\+)?([0-9]){7,15}) | 0..1 | The phone number of the enduser. |
Description: Contact Person (Must not be the same as the end user. It can be for insdtance a Facility Manager or a Care Taker)
Used by: contactInfo
| Element | Type | Occ | Comment |
|---|---|---|---|
| firstName | xs:string (minLength:1, maxLength:30) | 0..1 | First name of the contact |
| lastName | xs:string (minLength:1, maxLength:30) | 0..1 | Last name of the contact (only for BBCS-F optional, this element replaces the element endUserName) |
| phoneNr | xs:string (pattern:(\+)?([0-9]){7,15}) | 0..1 | Phone number of the contact (only for BBCS-F optional) |
| language | xs:string | 0..1 | ISO 639-1 (Codes for the representation of names of languages) (de = german; fr = french; it = italian) |
| notificationType | xs:int (totalDigits:3) | 1..1 | [LOV-ID: 3011] LOV_NOTIFICATION_TYPE: 1:None, 2:SMS, 3:eMail |
| notificationAddress | xs:string (maxLength:50) | 0..1 | eMail or Mobilenumber |
| preferredContactType | xs:int (totalDigits:3) | 0..1 | [LOV-ID:3028] LOV_PREFERRED_CONTACT_TYPE: 1:None, 2:SMS, 3:eMail, 4:Fixnet, 5:Mobile |
| preferredContactAddress | xs:string (maxLength:50) | 0..1 | Phone number or eMail address |
Description: Optical Telecommunications Outlet (OTO)
Used by: oto
| Element | Type | Occ | Comment |
|---|---|---|---|
| otoId | xs:string (minLength:13, maxLength:19) | 1..1 | An Optical Telecomunications Outlet (OTO) ID (e.g. A.123.456.789). |
| plugNr | xs:int (totalDigits:3) | 0..1 | A plug number (1..4). |
| partnerLabel | xs:string (maxLength:20) | 0..1 | The OTO Label of the swisscom partner |
Description: The cable box (aka. "ueberfuehrungspunkt", "UP").
Used by: cableBox
| Element | Type | Occ | Comment |
|---|---|---|---|
| boardNr | xs:int (totalDigits:6) | 1..1 | UP "Baugruppennummer". |
| switchingPlaceNr | xs:int (totalDigits:6) | 1..1 | UP "Schaltstellenelementnummer".In the GUI, this attribute is called "Switching Place Nr". |
| contactType | xs:int (totalDigits:3) | 1..1 | [LOV-ID: 0115] Kind of contact for UP. (LOV APV-WB115) (only in case of DN_TYPE=11 Business Line) (if known). |
| contactNr | xs:int (totalDigits:6) | 1..1 | Contact number for UP. (only in case of DN_TYPE=11 Business Line) (if known). (name in older versions: "clipboardNr") |
| coordinateX | xs:int (totalDigits:6) | 0..1 | X coordinate of UP. |
| coordinateY | xs:int (totalDigits:6) | 0..1 | Y coordinate of UP. |
Description: A service problem item.
Used by: createTroubleTicketRequestType, modifyPendingTroubleTicketRequestType
| Element | Type | Occ | Comment |
|---|---|---|---|
| contrEleId | xs:int (totalDigits:3) | 1..1 | [LOV-ID: 0320] A contract element ID |
| serviceSpeedProfileNr | xs:int (totalDigits:3) | 1..1 | Service speed profile number. |
| bbcsEquipment | xs:string (maxLength:256) | 0..1 | The BBCS equipment. |
| errorCategory | xs:int (totalDigits:3) | 1..1 | [LOV-ID: 3010] An error category. |
Description: Appointment data.
Used by: modifyPendingTroubleTicketRequestType
| Element | Type | Occ | Comment |
|---|---|---|---|
| appointmentId | xs:string (maxLength:32) | 1..1 | Appointment ID referencing an existing agreement. |
| appointmentAction | xs:string (Enumeration: New, Update, Cancel)
|
1..1 | Specific appointment-action which is to be triggered. New Update Cancel |
Extension of: workLogResponseType
| Element | Type | Occ | Comment |
|---|---|---|---|
| workLogDateTime | xs:dateTime | 1..1 | Creation DateTime of the Work Log Entry |
| createdByBackendSystem | xs:boolean | 1..1 | True if the worklog entry was created by the backend system |
Used by: atType
Extended by: workLogExtendedType
Extension of: workLogSimpleType
| Element | Type | Occ | Comment | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| attachment |
|
0..1 |
Used by: workLog, addWorkLogRequestType
Extension of: workLogSimpleType
| Element | Type | Occ | Comment | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| attachment |
|
0..1 | The binary content of the file, please limit the summary size of all the contens to 2Mb. Otherwise perform mutliple files and use addWorklog |
Extended by: workLogResponseType, workLogRequestType
| Element | Type | Occ | Comment |
|---|---|---|---|
| workLogSummary | xs:string (minLength:1, maxLength:100) | 1..1 | A summary of the work log entry. |
| workLogNotes | xs:string (maxLength:32768) | 0..1 | An additional comprehensive description. |
Description: An access trouble ticket and its details.
Used by: getDetailTroubleTicketAckType
Extension of: ttType
| Element | Type | Occ | Comment |
|---|---|---|---|
| contrEleId | xs:int (totalDigits:3) | 1..1 | [LOV-ID: 0320] A contract element ID |
| errorCategory | xs:int (totalDigits:3) | 1..1 | [LOV-ID: 3010] An error category. |
| problemDateTime | xs:dateTime | 1..1 | The date and time of the problem. |
| endUser | endUser | 1..1 | Information on the enduser (address, phone numbers, login, etc) |
| contactInfo | contactInfoType | 0..1 |
|
| dnVnNsn | xs:string (pattern:0[1-9]\d{8}) | 0..1 | The DN, VN or NSN. |
| dnVnNsnReq | xs:string (pattern:0[1-9]\d{8}) | 0..1 | The requested DN, VN, or NSN. |
| dnType | xs:int (totalDigits:3) | 0..1 | |
| bbType | xs:int (totalDigits:3) | 1..1 | [LOV-ID: 0276] The BB type. |
| serviceSpeedProfileNr | xs:int (totalDigits:3) | 0..1 | Service speed profile number. |
| serviceSpeedProfileNrReq | xs:int (totalDigits:3) | 0..1 | Requested service speed profile number. |
| stnrDdi | xs:string (pattern:0[1-9]\d{8}) | 0..1 | The "Stammnummer" (DDI) . |
| cableBox | cableBoxType | 0..1 | The cable box data (aka. "Ueberfuehrungspunkt", "UP"). |
| oto | otoType | 0..1 | Optical Termination Outlet |
| lastLoginDateTime | xs:dateTime | 0..1 | The date and time of the last login. |
| ttSaSla | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 0283] The service level assurance level of the trouble ticket. |
| ispSaSla | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 0283] The service level assurance level of the ISP. |
| wsgSaSla | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 0283] The service level assurance level calculated by WSG. |
| bbcsEquipment | xs:string (maxLength:256) | 0..1 | The BBCS equipment. |
| suspended | xs:boolean | 0..1 | Indicates whether the problem processing is being suspended or not. |
| nrOfWires | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 0268] The number of wires. |
| matCost | xs:decimal (totalDigits:10) | 0..1 | Total material costs in CHF. (example: '12.25'; pattern: '10d.2d') |
| ppId | xs:int (totalDigits:3) | 0..1 | Flat rate code in CHF. (E.g. 7 = xxx CHF) |
| ppCount | xs:int (totalDigits:3) | 0..1 | Number of flat rates per TT. (Generally 1) |
| stdId | xs:int (totalDigits:3) | 0..1 | Expense ratio code. (E.g. 01=140 CHF, 02=120 CHF) |
| expense | xs:int (totalDigits:5) | 0..1 | Work expense in minutes. (Conversion into hours and multiply with STD_ID rate not done) |
| appointmentId | xs:string (maxLength:32) | 0..1 | Appointment ID referencing an existing agreement. |
| lineMeasurementData | lineMeasurementData | 0..1 | A set of line measurement data. |
| opStatus | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 1014] The op status. |
| ispApplicationId | xs:string (maxLength:40) | 0..1 | Used for the ISP's routing. |
| ispApplicationEntityId | xs:string (maxLength:40) | 0..1 | Used for the ISP's routing. |
| endUserNotificationLevel | xs:int (totalDigits:3) | 0..1 | For future use. |
| ttOutOfSla | xs:boolean | 0..1 | Flag if the appointment date is out of SA SLA. |
| ttOutOfSlaReason | xs:string (maxLength:50) | 0..1 | The reason why the appointment date is out of SA SLA. |
| bbAdslEmulated | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 0401]: ADSL emulated flag.. |
| measuredIspValues | xs:string (maxLength:65536) | 0..1 | The measuerd values from ISP |
| workLogList | workLogResponseType | 0..n | |
| reasonOfPotential | reasonOfPotential | 0..1 | Reason of Potential - why is the Current Access Speed lower then the maximum |
| historyItem | ttBaseType | 0..n | A history entry of the ticket |
| detailedWorkReport | xs:string (maxLength:4096) | 0..1 | the detailed work report |
| endPoint | endPointType | 0..1 | Current End Point Data |
| cpeInfo | cpeInfo | 0..1 | Information about the CPE (Customer Modem). CPE (Customer Modem) Name same content as former cpeType |
| vectorized | xs:boolean | 0..1 | true if current technology type is VDSL Vectoring |
| technologyType | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 9025] LOV_TECHNOLOGY_TYPE (1 = VDSL; 2 = VDSL vectoring; 3 = G.FAST) |
| preOrderActivationCode | xs:string | 0..1 | The activation code for preOrders |
| siteDevelopment | siteDevelopment | 0..1 | site development information, quantiy of basic connectivities and utilized units |
| bepSiteCategory | xs:string (maxLength:32) | 0..1 | possible values are: "standard", "remote_fan_fibre_spot" |
| neverWorked | xs:boolean | 0..1 | Indicates if the connection vever worked before |
| serviceDownDurationNetto | xs:string (maxLength:8) | 0..1 | duration of hte service downtime e.g. 05h15m |
| bindingId | xs:string (maxLength:15) | 0..1 | BindingId or AccessId |
Description: A base type for trouble tickets with the common attributes.
Extended by: atType
Extension of: ttBaseType
| Element | Type | Occ | Comment |
|---|---|---|---|
| ttIdWsg | xs:decimal (totalDigits:10) | 1..1 | Ticket id assigned by WSG |
| ttIdSys | xs:string (maxLength:30) | 0..1 | Ticket id assigned by TT system |
| ispTtRef | xs:string (minLength:1, maxLength:30) | 0..1 | An external reference (an ID assigned by the ISP) identifying the TT. |
| ispId | xs:int (totalDigits:6) | 0..1 | The ISP id |
| ispName | xs:string (minLength:1, maxLength:30) | 0..1 | The ISP name |
| ispPhoneNr | xs:string (pattern:(\+)?([0-9]){7,15}) | 0..1 | The phone number of the ISP (business hours) |
| comment | xs:string (minLength:1, maxLength:256) | 0..1 | A comment (free text) |
| closedDateTime | xs:dateTime | 0..1 | The date and time when the entity has been closed. |
Description: A set of line measurement data.
Used by: atType
| Element | Type | Occ | Comment |
|---|---|---|---|
| noiseMarginUp | xs:decimal | 0..1 | The noise margin upstream value. |
| noiseMarginDown | xs:decimal | 0..1 | The noise margin downstream value. |
| actualBitrateUp | xs:decimal | 0..1 | The actual bitrate upstream value. |
| actualBitrateDown | xs:decimal | 0..1 | The actual bitrate downstream value. |
| attainableBitrateUp | xs:decimal | 0..1 | The attainable bitrate upstream value. |
| attainableBitrateDown | xs:decimal | 0..1 | The attainable bitrate downstream value. |
| attenuationUp | xs:decimal | 0..1 | The attenuation upstream value. |
| attenuationDown | xs:decimal | 0..1 | The attenuation downstream value. |
| nrSpontaneousResyncs | xs:int | 0..1 | The number of spontaneous resyncs. |
| calculatedLineLength | xs:int | 0..1 | The calculated line length. |
| correctionDbLineLength | xs:int | 0..1 | The correction DB line length. |
| xdslLineState | xs:string | 0..1 | [LOV-ID: 3007] The line state. |
| lastStatusChange | xs:dateTime | 0..1 | The date/time of the last status change. |
| icaResult | icaResultType | 0..1 | Inhouse Copper Analysis Result. |
Description: Description of Potential
Used by: reasonOfPotential
| Element | Type | Occ | Comment |
|---|---|---|---|
| potentialCode | xs:int (minInclusive:-9999, maxInclusive:9999) | 1..1 | Potential Code negative value: reason why the maximum speed is lower then the current access profile. -1000: Pending downgrooming without service impact -1001: Pending downgrooming with service impact -1100: Pending devloc change (lengthing order) -1200: The profile is set manually -1300: -1400: The access is unstable -1501: ICA problem – impact on stability: BridgeTap -1502: ICA problem – impact on stability: Degraded Contact -1503: ICA problem – impact on speed: Missing Splitter -1504: ICA problem – impact on stability: Missing Splitter on alarm system (Business Decision) -1505: ICA problem – impact on stability: External Interference detected -1506: ICA problem – impact on stability: Intermittent contact -1507: ICA problem – impact on stability: Loop unbalanced -1508: ICA problem – impact on stability: Untwisted in-house wiring -1509: ICA problem – impact on stability: Time varying noise (crosstalk and RFI) -1510: ICA problem – impact on stability: CPE interoperability problem -1511: ICA problem – impact on stability: Black-listed CPE -1517: ICA problem – impact on stability: Abnormal crosstalk -1518: ICA problem – impact on stability: Defect switched power supply -1519: ICA problem – impact on speed: BridgeTap on overhead line -1600: Stability reached with downgrade positive value: reason why the maximum speed is higher then the current acccess profile +1000: outstanding upgrooming +1100: pending devloc change (short order) +1200: the profile is set manually +1300: Old CPE hardware +1301: CPE hardware doesn’t support Vectoring. +1302: CPE firmware doesn’t support Vectoring tbd |
| potentialDescription | xs:string | 1..1 | Potential Description |
Description: Reason of Potential - why is the Current Access Speed lower then the maximum
Used by: atType, netDrivenInfo
| Element | Type | Occ | Comment |
|---|---|---|---|
| potential | potential | 1..n | Description of Potential Potential Code negative value: reason why the maximum speed is lower then the current access profile. -1000: Pending downgrooming without service impact -1001: Pending downgrooming with service impact -1100: Pending devloc change (lengthing order) -1200: The profile is set manually -1300: -1400: The access is unstable -1501: ICA problem – impact on stability: BridgeTap -1502: ICA problem – impact on stability: Degraded Contact -1503: ICA problem – impact on speed: Missing Splitter -1504: ICA problem – impact on stability: Missing Splitter on alarm system (Business Decision) -1505: ICA problem – impact on stability: External Interference detected -1506: ICA problem – impact on stability: Intermittent contact -1507: ICA problem – impact on stability: Loop unbalanced -1508: ICA problem – impact on stability: Untwisted in-house wiring -1509: ICA problem – impact on stability: Time varying noise (crosstalk and RFI) -1510: ICA problem – impact on stability: CPE interoperability problem -1511: ICA problem – impact on stability: Black-listed CPE -1517: ICA problem – impact on stability: Abnormal crosstalk -1518: ICA problem – impact on stability: Defect switched power supply -1519: ICA problem – impact on speed: BridgeTap on overhead line -1600: Stability reached with downgrade positive value: reason why the maximum speed is higher then the current acccess profile +1000: outstanding upgrooming +1100: pending devloc change (short order) +1200: the profile is set manually +1300: Old CPE hardware +1301: CPE hardware doesn’t support Vectoring. +1302: CPE firmware doesn’t support Vectoring tbd Potential Description |
Description: A base type for trouble tickets (used for history-items).
Used by: atType
Extended by: ttType
| Element | Type | Occ | Comment |
|---|---|---|---|
| ttState | xs:int (Enumeration: 1, 2, 3, 4, 5, 6, 7)
|
1..1 | The state of a trouble ticket. |
| ttStateReason | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 5107] LOV_TT_ITSM_INCIDENT_STATE_REASON: The reason for that the trouble ticket is in this state (only set for BBCS-F Tickets). |
| entryDateTime | xs:dateTime | 0..1 | The creation date and time of the corresponding entity. |
| lastModifiedDateTime | xs:dateTime | 1..1 | The last modification date and time of the corresponding entity. |
| lastModifiedUsername | xs:string (minLength:1, maxLength:30) | 1..1 | The username of the modifying user. |
| responseComment | xs:string (minLength:1, maxLength:256) | 0..1 | A response comment (used for information exchange between all parties; ref. also to 'addonInformation' provided in Create- or Modify- request) |
| responseCommentCode | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 3003] The response comment code. |
| problemDescription | xs:string (maxLength:2048) | 1..1 | Description of the problem |
| progressComment | xs:string (minLength:1, maxLength:256) | 0..1 | An information about progess |
| progressCommentCode | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 3001] The code of the progress information. |
| progressDateTime | xs:dateTime | 0..1 | The date and time of the progress |
| billingAction | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 1502] Billing actions. |
Used by: endPointType
| Element | Type | Occ | Comment |
|---|---|---|---|
| technologyType | xs:int (totalDigits:3) | 1..n | [LOV-ID: 9025] LOV_TECHNOLOGY_TYPE (1 = VDSL; 2 = VDSL vectoring; 3 = G.FAST) |
Description: The information on the xDSL access.
Used by: endPoint
| Element | Type | Occ | Comment |
|---|---|---|---|
| dnOffice | xs:string (minLength:1, maxLength:20) | 0..1 | The DN office ID string. (example: "62AES") |
| site | xs:string (maxLength:4) | 0..1 | Site of the Broad Band Device Location. |
| bbDeviceLocation | xs:string (minLength:1, maxLength:20) | 0..1 | The broad band device location. (e.g. "AES") |
| siteCategory | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 9008] The site categorization. |
| availableTechnologyTypes | availableTechnologyTypes | 0..1 |
Description: DSLAM Type(s) which are supported from the cpe - only current Technolgoie is in focus
Used by: cpeInfo
| Element | Type | Occ | Comment |
|---|---|---|---|
| technology | xs:int (totalDigits:3) | 1..1 | [LOV-ID: 1307] The technology (ADSL, VDSL2, BX ...). |
| dslamType | xs:int (totalDigits:3) | 0..n | [LOV-ID: 1064]: DSLAM Type. |
Description: CPE Capability, used in case of VDSL2 qualification to shows the TechnologyType (VDSL2 Legacy, Vectoring, g.fast) capability.
Used by: cpeInfo
| Element | Type | Occ | Comment |
|---|---|---|---|
| technologyType | xs:int (totalDigits:3) | 1..1 | [LOV-ID: 9025] LOV_TECHNOLOGY_TYPE (1 = VDSL; 2 = VDSL vectoring; 3 = G.FAST) |
| capabilityOverall | xs:int (totalDigits:3) | 1..1 | [LOV-ID: 9009] LOV_CPE_CAPABILITY_OVERALL (1 = Capable; 2 = Friendly; 3 = Forced Friendly; 4 = Disturber....) |
| capabilityHardware | xs:int (totalDigits:3) | 1..1 | [LOV-ID: 1350] LOV_CPE_CAPABILITY Does this CPE Hardware or Firmware support the declared TechnologyType? (0 = no;1 = yes; 2 = yes, but SFP needed) |
| capabilityFirmware | xs:int (totalDigits:3) | 1..1 | [LOV-ID: 1350] LOV_CPE_CAPABILITY Does this CPE Hardware or Firmware support the declared TechnologyType? (0 = no;1 = yes; 2 = yes, but SFP needed) |
Description: Information about the CPE (Customer Modem).
Used by: atType, xdslInfoType
| Element | Type | Occ | Comment |
|---|---|---|---|
| cpeName | xs:string (maxLength:100) | 1..1 |
|
| dslamTypeAllowed | dslamTypeAllowed | 0..n | DSLAM Type(s) which are supported from the cpe - only current Technolgoie is in focus |
| capability | cpeCapabilityType | 0..n | CPE Capability, used in case of VDSL2 qualification to shows the TechnologyType (VDSL2 Legacy, Vectoring, g.fast) capability. [LOV-ID: 9025] LOV_TECHNOLOGY_TYPE (1 = VDSL; 2 = VDSL vectoring; 3 = G.FAST) [LOV-ID: 9009] LOV_CPE_CAPABILITY_OVERALL (1 = Capable; 2 = Friendly; 3 = Forced Friendly; 4 = Disturber....) [LOV-ID: 1350] LOV_CPE_CAPABILITY Does this CPE Hardware or Firmware support the declared TechnologyType? (0 = no;1 = yes; 2 = yes, but SFP needed) [LOV-ID: 1350] LOV_CPE_CAPABILITY Does this CPE Hardware or Firmware support the declared TechnologyType? (0 = no;1 = yes; 2 = yes, but SFP needed) |
| comment | xs:string (minLength:1, maxLength:256) | 0..1 | A comment (free text) |
| cpeVendorSerialNumber | xs:string (maxLength:100) | 0..1 | CPE Vendor Serial Number f.e. 7C26649B6B20 F5360 SG4D10001362 |
| cpeVendorId | xs:string (maxLength:100) | 0..1 | CPE Vendor ID f.e. B5004244434D206A |
| cpeSystemVendorId | xs:string (maxLength:100) | 0..1 | CPE System Vendor ID f.e. 3D005341474D0000 |
| cpeVersionNumber | xs:string (maxLength:100) | 0..1 | CPE Version number f.e. AvfH43j2.26u 13 |
Description: site development information, quantiy of basic connectivities and utilized units
Used by: atType
| Element | Type | Occ | Comment |
|---|---|---|---|
| fullyDeveloped | xs:boolean | 1..1 | indicates if the site is fully developed (GVE Flag) |
| nrOfBasicConnectivities | xs:int | 0..1 | Nr of basic connectivites (AlwaysOn lines) |
| nrOfUtilisationUnits | xs:int | 0..1 | Nr of utilisation units (Usages on the site) |
Description: Optical Telecommunications Outlet (OTO); Request Type
Used by: getXdslInfoRequestType, getConnectivityCheckRequestType
| Element | Type | Occ | Comment | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| - choice: |
|
1..1 | |||||||||||||
| plugNr | xs:int (totalDigits:3) | 1..1 | A plug number (1..4). |
Description: The service details.
Used by: xdslInfoType
| Element | Type | Occ | Comment |
|---|---|---|---|
| contrEleId | xs:int (totalDigits:3) | 1..1 | [LOV-ID: 0320] A contract element ID |
| serviceType | xs:int | 0..1 | [LOV-ID: 3004] The service type. |
| effectiveSpeedDescription | xs:string | 0..1 | The description of the effective speed/virtual profile. |
| serviceSpeedDescription | xs:string | 0..1 | The description of the service speed. |
| speedProfileNr | xs:int (totalDigits:3) | 1..1 | Speed profile number |
| serviceSpeedValueDown | xs:string | 0..1 | The 'down' value of the service speed. |
| serviceSpeedValueUp | xs:string | 0..1 | The 'up' value of the service speed. |
| effectiveSpeedValueDown | xs:int | 0..1 | The 'down' value of the effective speed/virtual profile. |
| effectiveSpeedValueUp | xs:int | 0..1 | The 'up' value of the effective speed/virtual profile. |
Description: The access details.
Used by: xdslInfoType
| Element | Type | Occ | Comment |
|---|---|---|---|
| speedProfileDescription | xs:string | 0..1 | Speed profile description |
| speedProfileName | xs:string | 0..1 | Speed profile name |
| accessSpeedProfileNr | xs:int (totalDigits:3) | 1..1 |
|
| technologyType | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 9025] LOV_TECHNOLOGY_TYPE (1 = VDSL; 2 = VDSL vectoring; 3 = G.FAST) |
| accessProfileType | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 9024] LOV_ACCESS_PROFILE_TYPE (1 = Fixe Profile; 2 = Flex-Flex Profile (Vectoring, MaxSpeedOut); 3 = Full-Flex ) |
Used by: xdslInfoType
| Element | Type | Occ | Comment |
|---|---|---|---|
| overallStability | xs:int (totalDigits:3) | 1..1 | [LOV-ID: 1351] LOV_STABILITY_CLASS (1 = schlechte Stabilitaet/Qualitaet; 2 = mittlere Stabilitaet/Qualitaet; 3 = gute Stabilitaet/Qualitaet) |
| codingViolationDownstreamStability | xs:int (totalDigits:3) | 1..1 | [LOV-ID: 1351] LOV_STABILITY_CLASS (1 = schlechte Stabilitaet/Qualitaet; 2 = mittlere Stabilitaet/Qualitaet; 3 = gute Stabilitaet/Qualitaet) |
| codingViolationUpstreamStability | xs:int (totalDigits:3) | 1..1 | [LOV-ID: 1351] LOV_STABILITY_CLASS (1 = schlechte Stabilitaet/Qualitaet; 2 = mittlere Stabilitaet/Qualitaet; 3 = gute Stabilitaet/Qualitaet) |
| severelyErrorSecondsDownstreamStability | xs:int (totalDigits:3) | 1..1 | [LOV-ID: 1351] LOV_STABILITY_CLASS (1 = schlechte Stabilitaet/Qualitaet; 2 = mittlere Stabilitaet/Qualitaet; 3 = gute Stabilitaet/Qualitaet) |
| severelyErrorSecondsUpstreamStability | xs:int (totalDigits:3) | 1..1 | [LOV-ID: 1351] LOV_STABILITY_CLASS (1 = schlechte Stabilitaet/Qualitaet; 2 = mittlere Stabilitaet/Qualitaet; 3 = gute Stabilitaet/Qualitaet) |
| spontaneousResyncsStability | xs:int (totalDigits:3) | 1..1 | [LOV-ID: 1351] LOV_STABILITY_CLASS (1 = schlechte Stabilitaet/Qualitaet; 2 = mittlere Stabilitaet/Qualitaet; 3 = gute Stabilitaet/Qualitaet) |
| attainableActualBitrateRatio | xs:int (totalDigits:3) | 1..1 | [LOV-ID: 1352] LOV_ATTAINABLE_ACTUAL_BITRATE_RATIO Low ratio means small security bandwith betweed used and possible bitrate - risky (1 = Low Margin; 2 = High Margin) |
Description: Inhouse Copper Analysis Problem
Used by: icaResultType
| Element | Type | Occ | Comment |
|---|---|---|---|
| description | xs:int (totalDigits:3) | 1..1 | [LOV-ID: 3014] Problem code |
| descriptionText | xs:string (maxLength:200) | 1..1 | Problem description |
| confidence | xs:int | 1..1 | Problem probability in percent |
| impact | xs:string (maxLength:200) | 1..1 | Impact description |
| impactAttainBitrateDown | xs:int | 1..1 | Potential impact on the attainable downstream bitrate |
| impactAttainBitrateUp | xs:int | 1..1 | Potential impact on the attainable upstream bitrate |
| remainTime | xs:int | 0..1 | remaining time in minutes during which the line remains blocked |
Description: Inhouse Copper Analysis Result
Used by: icaResult
| Element | Type | Occ | Comment |
|---|---|---|---|
| analysisDate | xs:dateTime | 1..1 | Date of last analysis |
| analysisDate24h | xs:dateTime | 1..1 | Date of last analysis |
| analysisState | xs:int (totalDigits:3) | 1..1 | [LOV-ID: 3012] State of last analysis (Finished, Cancel, Abort, Error, ErrorCAN, …) |
| analysisType | xs:int (totalDigits:3) | 1..1 | [LOV-ID: 3013] Type of last analysis (SELT, LQD) |
| problemDetected | xs:int (totalDigits:3) | 1..1 | [LOV-ID: 3017] Problem detected in last analysis (Yes Impact, Yes Noimpact, No) |
| potentialAttainBitrateDown | xs:int | 1..1 | Potential new downstream bitrate after problem fix |
| potentialAttainBitrateUp | xs:int | 1..1 | Potential new upstream bitrate after problem fix |
| potentialAccessProfileNr | xs:int (totalDigits:3) | 1..1 | Potential access profile after problem fix ([LOV-ID: 1134] speed profile number) |
| accessSpeedGainDown | xs:int | 1..1 | Potential net access downstream bitrate gain |
| accessSpeedGainUp | xs:int | 1..1 | Potential net access upstream bitrate gain |
| accessProblemType | xs:int (totalDigits:3) | 1..1 | [LOV-ID: 3015] Calculated stability problem of the access |
| bbrSocketInstalled | xs:boolean | 1..1 | BBR socket installed |
| bbrSocketInstallationDate | xs:dateTime | 1..1 | BBR socket installation date |
| icaProblems | icaProblemType | 0..n | Inhouse Copper Analysis Problem |
Used by: xdslInfoType
| Element | Type | Occ | Comment |
|---|---|---|---|
| txPower | xs:string | 0..1 | |
| rxPower | xs:string | 0..1 | |
| ifOperStatus | xs:string | 0..1 |
Description: A DSLAM alarm.
Used by: xdslInfoType
| Element | Type | Occ | Comment |
|---|---|---|---|
| dslamAlarmType | xs:string | 1..1 | The type of a DSLAM alarm. (e.g. ASAM, ASAM_CARD, ISAM, ISAM_CARD, FAN, FAN_CARD, OTHER) |
| startDateTime | xs:dateTime | 0..1 | The start date/time of the alarm. |
| endDateTime | xs:dateTime | 0..1 | The end date/time of the alarm. |
| expectedRepairTime | xs:int | 0..1 | The approximated expected repair time. |
Description: A history item of an NA-measurement.
Used by: xdslInfoType
| Element | Type | Occ | Comment |
|---|---|---|---|
| date | xs:dateTime | 1..1 | The date of the measurement. |
| nrSpontaneousResyncs | xs:int | 0..1 | The number of spontaneous resyncs. |
| codingViolationsUp | xs:decimal | 0..1 | The coding violations upstream value. |
| codingViolationsDown | xs:decimal | 0..1 | The coding violations downstream value. |
| noiseMarginUp | xs:decimal | 0..1 | The noise margin upstream value. |
| noiseMarginDown | xs:decimal | 0..1 | The noise margin downstream value. |
| noiseMarginUnit | xs:string | 0..1 | The noise margin unit. |
| actualBitrateUp | xs:decimal | 0..1 | The actual bitrate upstream value. |
| actualBitrateDown | xs:decimal | 0..1 | The actual bitrate downstream value. |
| actualBitrateUnit | xs:string | 0..1 | The actual bitrate unit. |
| attainableBitrateUp | xs:decimal | 0..1 | The attainable bitrate upstream value. |
| attainableBitrateDown | xs:decimal | 0..1 | The attainable bitrate downstream value. |
| attainableBitrateUnit | xs:string | 0..1 | The attainable bitrate unit. |
| attenuationUp | xs:decimal | 0..1 | The attenuation upstream value. |
| attenuationDown | xs:decimal | 0..1 | The attenuation downstream value. |
| attenuationUnit | xs:string | 0..1 | The attenuation unit. |
| dslamName | xs:string (maxLength:30) | 0..1 | name of the DSLAM (e.g.: ipc-aar730-s-vd-05) |
| bbLogPortNr | xs:string (minLength:1, maxLength:20) | 0..1 | Logical portt |
| measuredTime | xs:int | 0..1 | Measured Time [sec] |
| serialNumber | xs:string (maxLength:256) | 0..1 | The serial number from the CPE |
| severelyErrorSecDown | xs:int | 0..1 | severely downstream errors per second |
| severelyErrorSecUp | xs:int | 0..1 | severely upstream errors per second |
| codingViolationsDown15Minutes | xs:string (minLength:1, maxLength:1000) | 0..1 | downstream coding violations per 15 minutes. 15 minute counters of a day, semicolon separted, for example: 0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;740;633;21;430;563;0;0;0;0;1051;66;0;370;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;351;66;0;0;289;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;1;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0 |
| codingViolationsUp15Minutes | xs:string (minLength:1, maxLength:1000) | 0..1 | upstream coding violations per 15 minutes. 15 minute counters of a day, semicolon separted |
| severelyErrorSecDown15Minutes | xs:string (minLength:1, maxLength:1000) | 0..1 | severely downstream errors per 15 minutes. 15 minute counters of a day, semicolon separted |
| severelyErrorSecUp15Minutes | xs:string (minLength:1, maxLength:1000) | 0..1 | severely upstream errors per 15 minutes. 15 minute counters of a day, semicolon separted |
| accessSpeedProfileNr | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 1134] Access Speed profile number |
| interleaveMode | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 1008] The interleave mode. |
| psdClass | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 1061] BB_PSD_CLASS, Power Spectral Density Class |
Used by: netDrivenInfo
| Element | Type | Occ | Comment |
|---|---|---|---|
| technology | xs:int (totalDigits:3) | 1..1 | [LOV-ID: 1307] The technology (ADSL, VDSL2, BX ...). |
| psdClass | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 1061] BB_PSD_CLASS, Power Spectral Density Class |
| technologyType | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 9025] LOV_TECHNOLOGY_TYPE (1 = VDSL; 2 = VDSL vectoring; 3 = G.FAST) |
| accessSpeedProfileNr | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 1134] Access Speed profile number |
| interleaveMode | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 1008] The interleave mode. |
| effectiveSpeedValueUp | xs:int | 0..1 | The 'up' value of the effective speed/virtual profile. |
| effectiveSpeedValueDown | xs:int | 0..1 | The 'down' value of the effective speed/virtual profile. |
Description: The access details.
Used by: xdslInfoType
| Element | Type | Occ | Comment | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| reasonOfPotential | reasonOfPotential | 0..1 | Reason of Potential - why is the Current Access Speed lower then the maximum | ||||||||||||||||||||||||||||||||
| lqsMaxTechnologyType | xs:int (totalDigits:3) | 0..1 | aka VDSLType [LOV-ID: 9025] LOV_TECHNOLOGY_TYPE (1 = VDSL; 2 = VDSL vectoring; 3 = G.FAST) | ||||||||||||||||||||||||||||||||
| lqsMaxAccessProfileNr | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 1134] Access Speed profile number. | ||||||||||||||||||||||||||||||||
| naFailureType | xs:int (totalDigits:3) | 1..1 | [LOV-ID: 1060] The Network Analyser FailureType: 0 = OK - NaResult available; 2 = NOK- No NA data; 11 = OK - but ADSL NAmax in Case of Port mismatch and CPE OK; 12 = OK - but ADSL NAmax in Case of Port mismatch and CPE nok / na; 13 = OK - but ADSL NAmax in Case of Port match but CPE na / nok; 14 = OK - but ADSL NAmax in Case of Port match, CPE match but the upgrooming is missing; 15 = OK - but ADSL2+ Upgrooming Process is Running | ||||||||||||||||||||||||||||||||
| naMaxTechnologyType | xs:int (totalDigits:3) | 0..1 | aka VDSLType [LOV-ID: 9025] LOV_TECHNOLOGY_TYPE (1 = VDSL; 2 = VDSL vectoring; 3 = G.FAST) | ||||||||||||||||||||||||||||||||
| naMaxAccessProfileNr | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 1134] Access Speed profile number. | ||||||||||||||||||||||||||||||||
| lastNetDrivenAction |
|
0..n | |||||||||||||||||||||||||||||||||
| runningNetDrivenAction |
|
0..1 |
Used by: meltMesureType
| Element | Type | Occ | Comment |
|---|---|---|---|
| acvab | xs:float | 0..1 | AC voltage from A wire to B wire [V] |
| acvag | xs:float | 0..1 | AC voltage from A wire to Ground [V] |
| acvbg | xs:float | 0..1 | AC voltage from B wire to Ground [V] |
| dcvab | xs:float | 0..1 | DC voltage from A wire to B wire [V] |
| dcvag | xs:float | 0..1 | DC voltage from A wire to Ground [V] |
| dcvbg | xs:float | 0..1 | DC voltage from B wire to Ground [V] |
| rab | xs:int | 0..1 | resistance from A wire to B wire [Ω] |
| rba | xs:int | 0..1 | resistance from B wire to A wire [Ω] |
| rag | xs:int | 0..1 | resistance from A wire to Ground [Ω] |
| rbg | xs:int | 0..1 | resistance from B wire to Ground [Ω] |
| cab | xs:float | 0..1 | pure capacity from A wire to B wire [nF] |
| cag | xs:float | 0..1 | pure capacity from A wire to Ground [nF] |
| cbg | xs:float | 0..1 | pure capacity from B wire to Ground [nF] |
Used by: meltResult
Extended by: meltResult
| Element | Type | Occ | Comment |
|---|---|---|---|
| analysisDate | xs:dateTime | 1..1 | date and time of the measurement |
| meltState | xs:int (totalDigits:3) | 1..1 | [LOV-ID: 3030] LOV_MELT_STATUS: Melt status with short and long description. |
| lineLengthA | xs:int | 1..1 | 'A' wire length from CAN/MicroCAN toward customer premise [m] |
| lineLengthB | xs:int | 1..1 | 'B' wire length from CAN/MicroCAN toward customer premise [m] |
| meltLineState | meltLineState | 1..1 | AC voltage from A wire to B wire [V] AC voltage from A wire to Ground [V] AC voltage from B wire to Ground [V] DC voltage from A wire to B wire [V] DC voltage from A wire to Ground [V] DC voltage from B wire to Ground [V] resistance from A wire to B wire [Ω] resistance from B wire to A wire [Ω] resistance from A wire to Ground [Ω] resistance from B wire to Ground [Ω] pure capacity from A wire to B wire [nF] pure capacity from A wire to Ground [nF] pure capacity from B wire to Ground [nF] |
Description: MELT-measurements
Used by: xdslInfoType
Extension of: meltMesureType
| Element | Type | Occ | Comment |
|---|---|---|---|
| meltHistory | meltMesureType | 0..n | previous MELT-measurements |
Description: The information on the xDSL access.
Used by: getXdslInfoResponseType
| Element | Type | Occ | Comment |
|---|---|---|---|
| actualBitrateUp | xs:decimal | 0..1 | The actual bitrate upstream value. |
| actualBitrateDown | xs:decimal | 0..1 | The actual bitrate downstream value. |
| actualBitrateUnit | xs:string | 0..1 | The actual bitrate unit. |
| attainableBitrateUp | xs:decimal | 0..1 | The attainable bitrate upstream value. |
| attainableBitrateDown | xs:decimal | 0..1 | The attainable bitrate downstream value. |
| attainableBitrateUnit | xs:string | 0..1 | The attainable bitrate unit. |
| attenuationUp | xs:decimal | 0..1 | The attenuation upstream value. |
| attenuationDown | xs:decimal | 0..1 | The attenuation downstream value. |
| attenuationUnit | xs:string | 0..1 | The attenuation unit. |
| capacityOccupationUp | xs:decimal | 0..1 | The capacity occupation upstream value. |
| capacityOccupationDown | xs:decimal | 0..1 | The capacity occupation downstream value. |
| capacityOccupationUnit | xs:string | 0..1 | The capacity occupation unit. |
| bbType | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 0276] The BB type. |
| contrEleId | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 0320] A contract element ID |
| calculatedLineLength | xs:int | 0..1 | The calculated line length. |
| correctionDbLineLength | xs:int | 0..1 | The correction DB line length. |
| dnType | xs:int (totalDigits:3) | 0..1 | |
| dnVnNsn | xs:string (pattern:0[1-9]\d{8}) | 0..1 | The DN, VN or NSN. |
| interleaveMode | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 1008] The interleave mode. |
| ispId | xs:int (totalDigits:6) | 0..1 | The ISP id |
| ispIdProvider | xs:int (totalDigits:6) | 0..1 | The provider ISP id. |
| lastStatusChange | xs:dateTime | 0..1 | The date/time of the last status change. |
| lineStateId | xs:long | 0..1 | The line state id. |
| noiseMarginUp | xs:decimal | 0..1 | The noise margin upstream value. |
| noiseMarginDown | xs:decimal | 0..1 | The noise margin downstream value. |
| noiseMarginUnit | xs:string | 0..1 | The noise margin unit. |
| nrSpontaneousResyncs | xs:int | 0..1 | The number of spontaneous resyncs. |
| orderNr | xs:string (pattern:[1-9]\d{25}) | 0..1 | Order Nr. |
| requestDate | xs:dateTime | 0..1 | The date/time of the request. |
| responseDate | xs:dateTime | 0..1 | The date/time of the response. |
| responseMessage | xs:string | 0..1 | The response message. |
| service | service | 0..n | The service details. |
| sessionType | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 1005] The session type. |
| accessProfile | accessProfile | 0..1 |
|
| xdslInfoLight | xs:string (Enumeration: red, yellow, green)
|
0..1 | The information-light (line state) of the xDSL access. |
| xdslLineState | xs:string | 0..1 | [LOV-ID: 3007] The line state. |
| opStatus | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 1014] The op status. |
| cpeInfo | cpeInfo | 0..1 | Information about the CPE (Customer Modem). CPE (Customer Modem) Name same content as former cpeType |
| stabilityInfo | stabilityInfo | 0..1 | [LOV-ID: 1352] LOV_ATTAINABLE_ACTUAL_BITRATE_RATIO Low ratio means small security bandwith betweed used and possible bitrate - risky (1 = Low Margin; 2 = High Margin) |
| icaResult | icaResultType | 0..1 | Inhouse Copper Analysis Result. |
| fanPortStateLight | xs:string (Enumeration: red, yellow, green)
|
0..1 | The information-light (line state) |
| fanInfo | fanInfoType | 0..1 | |
| ipAddress | xs:string | 0..1 | An IP address. |
| endPoint | endPointType | 0..1 | Current End Point Data |
| problemDescription | xs:string (maxLength:200) | 0..1 | The description of the underlying problem. |
| proposedRepairAction | xs:string (maxLength:200) | 0..1 | The proposed 'repair' action. |
| dslamAlarm | dslamAlarm | 0..n | A DSLAM alarm. The start date/time of the alarm. The end date/time of the alarm. |
| measurementHistoryItem | measurementHistoryItem | 0..n | A history item of an NA-measurement. The date of the measurement. severely downstream errors per second severely upstream errors per second downstream coding violations per 15 minutes. 15 minute counters of a day, semicolon separted, for example: 0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;740;633;21;430;563;0;0;0;0;1051;66;0;370;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;351;66;0;0;289;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;1;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0 upstream coding violations per 15 minutes. 15 minute counters of a day, semicolon separted severely downstream errors per 15 minutes. 15 minute counters of a day, semicolon separted severely upstream errors per 15 minutes. 15 minute counters of a day, semicolon separted |
| bbAdslEmulated | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 0401]: ADSL emulated flag.. |
| dslamName | xs:string (maxLength:30) | 0..1 | name of the DSLAM (e.g.: ipc-aar730-s-vd-05) |
| networkType | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 1315] NETWORK_TYPE, the network type 1 - ATM, 2 - EAP, 3 - WARP, 4 - RAMPplus |
| psdClass | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 1061] BB_PSD_CLASS, Power Spectral Density Class |
| userName | xs:string (minLength:1, maxLength:30) | 0..1 | The submitter of the getXdslInfo request |
| vectorized | xs:boolean | 0..1 | true if current technology type is VDSL Vectoring |
| bbPortLineType | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 1353] bb Port Line Type |
| bepSiteCategory | xs:string (maxLength:32) | 0..1 | possible values are: "standard", "remote_fan_fibre_spot" |
| netDrivenInfo | netDrivenInfo | 0..1 | The access details. |
| irIdWsg | xs:decimal (totalDigits:10) | 0..1 |
|
| meltResult | meltResult | 0..1 | MELT-measurements previous MELT-measurements |
| splitterRatio | xs:string | 0..1 | |
| splitterCable | xs:string | 0..1 |
Used by: PlannedOutage
| Element | Type | Occ | Comment |
|---|---|---|---|
| dnVnNsn | xsd:string (minLength:1, maxLength:255) | 1..1 | Is NSN, wich is represented form DN or VN |
| services | xsd:string (Enumeration: internet, streaming, vobb)
|
1..n |
Used by: getDnNsnPlannedOutageAckType, PlannedOutageList
| Element | Type | Occ | Comment |
|---|---|---|---|
| outage_id | xsd:string | 1..1 | |
| startDateTime | xsd:dateTime | 1..1 | |
| endDateTime | xsd:dateTime | 1..1 | |
| duration | xsd:int | 1..1 | |
| reason_id | xsd:int | 0..1 | |
| source | xsd:string (Enumeration: PW, UMSA)
|
1..1 | |
| customer_list | Customer | 1..n |
Used by: PlannedOutageElements
| Element | Type | Occ | Comment |
|---|---|---|---|
| PlannedOutage | PlannedOutage | 0..n |
Description: The list of affected customers
Used by: networkCustomerNotificationType
| Element | Type | Occ | Comment |
|---|---|---|---|
| dnVnNsn | xs:string (pattern:0[1-9]\d{8}) | 1..n | The DN, VN or NSN. |
Description: The network customer notification
Used by: networkCustomerNotification
| Element | Type | Occ | Comment |
|---|---|---|---|
| dnVnNsnList | dnVnNsnList | 1..1 | The list of affected customers |
| customerNotificationId | xs:string (minLength:1, maxLength:200) | 1..1 | The customer notification id, e.g. STT ITSM 293452438655 |
| customerNotificationType | xs:string (minLength:1, maxLength:512) | 1..1 | The customer notification type, e.g. CAN-Change |
| networkElementType | xs:string (minLength:1, maxLength:200) | 1..1 | The network element type, i.e. CAN |
| networkElementName | xs:string (minLength:1, maxLength:200) | 1..1 | The network element name, i.e. ipd-05621-s-ca-01 |
| startDateTime | xs:dateTime | 1..1 | The start date/time of the disruption |
| endDateTime | xs:dateTime | 1..1 | The end date/time of the disruption |
| duration | xs:int | 1..1 | The duration of the disruption in minutes |
Description: Valid Access Profiles Item Item
Used by: getValidAccessProfileResponseType
| Element | Type | Occ | Comment |
|---|---|---|---|
| accessSpeedProfileNr | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 1134] Access Speed profile number |
| psdClass | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 1061] BB_PSD_CLASS, Power Spectral Density Class |
| interleaveMode | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 1008] The interleave mode. |
| bbType | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 0276] The BB type. |
| technologyType | xs:int (totalDigits:3) | 0..1 | [LOV-ID: 9025] LOV_TECHNOLOGY_TYPE (1 = VDSL; 2 = VDSL vectoring; 3 = G.FAST) |
Description: Service trouble ticket
Used by: getConnectivityCheckResponseType
| Element | Type | Occ | Comment |
|---|---|---|---|
| troubleTicketKey | xs:string | 1..1 | |
| troubleTicketState | xs:string | 0..1 | |
| resolutionCategorizationTier1 | xs:string | 0..1 | |
| zip | xs:int (minInclusive:1000, maxInclusive:999999) | 0..1 | A zip code. |
| city | xs:string (minLength:1, maxLength:25) | 0..1 | A city name. |
| canton | xs:string | 0..1 |
Description: Maintenance ticket
Used by: getConnectivityCheckResponseType
| Element | Type | Occ | Comment | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| changeRequestId | xs:string | 1..1 | |||||||||||||
| resources |
|
0..n | |||||||||||||
| maintenanceStatus | xs:string | 0..1 | |||||||||||||
| startDateTime | xs:dateTime | 0..1 | |||||||||||||
| endDateTime | xs:dateTime | 0..1 |
Description: vitality
Used by: getConnectivityCheckResponseType
| Element | Type | Occ | Comment |
|---|---|---|---|
| value | xs:int | 1..1 | The vitality of a service indicates the present status of the service that is either available (vitality = 100) or unavailable (vitality = 0). -1 = never worked |
| confidence | xs:int | 0..1 | a number between 0-100 that reflects the confidence level of the value. Currently, this value is not calculated by SEO -> it is static = 65 |