Updating firmware
Your router firmware
Swisscom regularly updates the Centro Business 2.0 firmware so you continue to benefit from new functions and improvements after purchase. Updates are automatic, usually at night.
We call the software which provides all the Centro Business 2.0 functions firmware. This web page provides details of the current firmware versions, improvements and new functions.
Latest firmware for Centro Business 2.0 (January 2020)
9.04.10
-
Release Note latest firmware
(PDF Datei, 349 KB)
-
Release Notes older Firmware versions
(PDF Datei, 354 KB)
Installation
If you do not want to wait until your router is upgraded, you can also download and install the firmware manually.
Firmware update via the router portal (recommended)
- Use an Ethernet cable to connect your router and open the router portal by entering the URL 192.168.1.1 in your browser. Go to menu item “Settings”> “Router” > “Firmware”.
- 2a) Click “Search for updates” to find the latest firmware.
2b) If you already have firmware saved locally, go to “Search” to add the firmware file.
- Use the slider bar to control whether the firmware will update immediately or at 2 am.
- Click “Update firmware”.
Toolkit for Business
Firmware for "Toolkit for Business" users
-
Current Firmware & Release Note
(PDF Datei, 349 KB)
Swisscom regularly updates the Centro Business firmware so you continue to benefit from new functions and improvements after purchase. Updates are automatic, usually at night.
We call the software which provides all the Centro Business functions firmware. This web page provides details of the current firmware versions, improvements and new functions.
Latest firmware for Centro Business (Octobre 2020)
7.12.16 sig
All Centro Business will be automatically updated to the new version in the next few weeks.
Installation
If you do not want to wait until your router is upgraded, you can also download and install the firmware manually.
Firmware update via the router portal (recommended):
- Connect your router by means of an Ethernet cable and open the router portal by entering the URL 192.168.1.1 in your browser
- You can find the latest firmware release under the menu item Settings --> Router --> Firmware
- Search for the latest firmware release (see item 1 of the figure)
- Update the firmware if your existing release is not up to date (see item 2 of the figure)
Release notes of older firmware versions
Router Firmware 7.12.12 sig (Octobre 2019)
- Ensuring Swisscom network compatibility (certificate)
Router Firmware 7.12.10 sig (September 2017)
New design in the router portal
- The layout and the navigation structure (PDF) in the router portal have been revised and selectively optimized.
- In the login window, the user can now select initially whether the access should be made via an encrypted https-connection or not.
Improved WPS settings in the router portal
The user can specify under the WLAN menu item, whether or for which WLAN exactly (WLAN 1, WLAN 2 or guest network) the WPS function should be available (for the connection of additional devices), if the WLAN key at the Centro Business is pressed for 5 seconds or WPS is started via the router portal. Important: for security reasons, the WPS function is deactivated after each restart or a router reset.
Outdated WPA encryption for the WLAN has been removed
The interim WPA encryption standard is no longer supported. Older devices that only support WPA must be connected to the Internet as an alternative. All newer WLAN devices automatically connect to the standard WPA2 encryption.
Various bug fixes.
Router Firmware 7.10.18 sig (November 2016)
- Introduction of IP dual stack IPv4 and IPv6
- New IP Passthrough for Local Security Gateway use case
- WAN reset from router GUI always available
- VPN can be set up without fixed IP address
- Firewall fully adapted for LAN and DMZ
- Port forwarding (NAPT) fully adapted
- Number allocation adapted for analogue telephones
- Device list adapted
Please use the following online form for suggestions or improvements to the current firmware
In case of problems or support requests please contact us.