Meta navigation

TV-Box STB3210-DVR-A

STB3210-DVR-A (2/2012 – today)

Power consumption

Operational mode Power consumption in watts
Off 0 W
On 16.5 W
Active Standby 11.5 W
Deep Standby 0.6 W


Recommendations

If used daily

If you don’t need your device for more than two hours, select the energy-saving Deep Standby option. Although activating takes a little longer (up to two and a half minutes), you will reduce power consumption substantially.

The enery-saving Deep Standby option does not affect any recordings you have planned. However, when Deep Standby is active, remotely programming recordings via the Internet or Swisscom TV app is restricted.

 

Activating Deep Standby

Deep Standby can be easily activated and configured using your remote control: Press MENU -> SETTINGS -> ENERGY-SAVING OPTIONS

In case of non-use for a longer period of time

If you don’t need the device for several days or even weeks, e.g. during the holidays, it uses practically no electricity at all in Deep Standby. The energy-saving option does not affect any recordings you have planned. However, when Deep Standby is active, remotely programming recordings via the Internet or Swisscom TV app is restricted.

And, of course, you save most electricity by disconnecting the TV box and mains adapter from the power, which then deactivates all recording functions. When you start up again, wait until the modem is connected to the Internet before you switch on the TV box.



Your savings potential per annum

with Deep Standby

50% and more, on average around 25 kWh

 

With Off

Four weeks of holidays, up to 8 kWh

 

Total: 33 kWh

140 days

An energy saving lamp will then be illuminated around the clock for around 140 days.



Recommended

Powerline ECO Control Adapter

Switch connected devices on/off via the Internet and measure your energy consumption

Details